Pre Owned Machines
Purchase of Pre-Owned Machines
If you have surplus tablet presses in your laboratory, development department or production, please let us know.
Pre Owned Machines
Below you will find our stock of used tablet presses.
If you have any questions about the machines or would like to make an appointment for a trial, please contact us!
Korsch EK0 Single punch press (ST)
– Very few hours of operation
– 2-way adjustable stroke rate (54 and 34 strokes per minute, 3250 and 2040 tablets per hour)
– Mounted on a stable and practical work table with additional storage space below
– New hopper
– Ready for operation
– Ideal for small batches and research/development
– Incl. machine documentation and operating tools
– Optional retrofitting possible according to your requirements
– Equipping with TabCon-Series recommended
– Delivery of tableting tooling
The following suitable used tableting tooling sets are for sale (also separately):
Round 6mm convex / Round 8mm convex / Round 9mm convex
Round 12mm convex / Round 13mm convex
Round 4,7mm flat-faced bevel / Round 6mm flat-faced bevel
Round 12mm flat-faced bevel / Round 13mm flat-faced bevel
Round 18mm flat-faced bevel / Round 17mm flat-faced bevel bisect
Round 12mm flat-faced bevel-edged (upper: arrow; lower: 222)
Round 12mm flat-faced bevel-edged (upper: arrow; lower: 233)
Round 12mm flat-faced bevel-edged (upper: arrow; lower: 196)
Round 8mm flat-faced plain double tip
Round 9mm flat-faced bevel-edged double tip
Round 8mm convex double tip / Round 6mm flat-faced plain triple tip
Round 5mm convex triple tip / Round 6mm convex triple tip
| Manufacturer | Korsch |
| Machine type |
EK0 |
| Year of manufacture | 1962 |
| Tool type | Korsch EK0 |
| Tool stations |
1 (MultiTip-Tooling possible) |
| Tool guide | Upper and lower |
| Upper punch force max. | 30 kN |
| Precompression force max. | N/A |
| Tablet diameter max. | 20 mm |
| Filling max. | 15 mm |
| Tablet output max. | 3250 pcs. per h (with SingleTip-Tooling) |
| Measuring points | No measuring installed |
| Feeder type | Gravity feeder with agitator |
| Dimensions fully | W500 x D500 x H1.700 mm |
| Weight | appr. 130 kg |
| Power supply | 230 V protective contact |
Korsch EK0 Special Single punch press
Special version with floating table and stearate dusting
– Floating table for even pressing, even of tall tablets
– Separate filling chamber for stearate dusting
– Hydraulic system for overload protection
– Clutch
– Safety chain
– Enclosure of the movement area of the feeder
– Infinitely variable number of strokes through planetary gear
– Tablet counter
– Ready for operation
– Ideal for small batches and research/development
– Incl. machine documentation and operating tools
– Optional retrofitting possible according to your requirements
– Equipping with TabCon-Series recommended
– Delivery of tableting tooling
The following suitable used tableting tooling sets are for sale (also separately):
Round 6mm convex / Round 8mm convex / Round 9mm convex
Round 12mm convex / Round 13mm convex
Round 4,7mm flat-faced bevel / Round 6mm flat-faced bevel
Round 12mm flat-faced bevel / Round 13mm flat-faced bevel
Round 18mm flat-faced bevel / Round 17mm flat-faced bevel bisect
Round 12mm flat-faced bevel-edged (upper: arrow; lower: 222)
Round 12mm flat-faced bevel-edged (upper: arrow; lower: 233)
Round 12mm flat-faced bevel-edged (upper: arrow; lower: 196)
Round 8mm flat-faced plain double tip
Round 9mm flat-faced bevel-edged double tip
Round 8mm convex double tip / Round 6mm flat-faced plain triple tip
Round 5mm convex triple tip / Round 6mm convex triple tip
| Manufacturer | Korsch |
| Machine type |
EK0 |
| Year of manufacture | 1993 |
| Tool type | Korsch EK0 |
| Tool stations |
1 (MultiTip-Tooling possible) |
| Tool guide | Upper and lower |
| Upper punch force max. | 30 kN |
| Precompression force max. | N/A |
| Tablet diameter max. | 20 mm |
| Filling max. | 15 mm |
| Tablet output max. | 3000 pcs. per h (with SingleTip-Tooling) |
| Measuring points | No measuring installed |
| Feeder type | Gravity feeder with agitator |
| Dimensions fully | W500 x D500 x H1.700 mm |
| Weight | appr. 130 kg |
| Power supply | 400V, 3Ph + N, 50Hz |
Korsch EK0 Single punch presses (B1/9)
– Ready for operation
– New drive with continuously variable speed
– New electronics and various new mechanical parts
– Completely mechanically overhauled and laquered
– Ideal for small batches and research/development
– Incl. machine documentation and operating tools
– Optional retrofitting possible according to your requirements
– Equipping with TabCon-Series recommended
– Delivery of tableting tooling
– A total of 5 machines available
The following suitable used tableting tooling sets are for sale (also separately):
Round 6mm convex / Round 8mm convex / Round 9mm convex
Round 12mm convex / Round 13mm convex
Round 4,7mm flat-faced bevel / Round 6mm flat-faced bevel
Round 12mm flat-faced bevel / Round 13mm flat-faced bevel
Round 18mm flat-faced bevel / Round 17mm flat-faced bevel bisect
Round 12mm flat-faced bevel-edged (upper: arrow; lower: 222)
Round 12mm flat-faced bevel-edged (upper: arrow; lower: 233)
Round 12mm flat-faced bevel-edged (upper: arrow; lower: 196)
Round 8mm flat-faced plain double tip
Round 9mm flat-faced bevel-edged double tip
Round 8mm convex double tip / Round 6mm flat-faced plain triple tip
Round 5mm convex triple tip / Round 6mm convex triple tip
| Manufacturer | Korsch |
| Machine type |
EK0 |
| Year of manufacture | diverse |
| Tool type | Korsch EK0 |
| Tool stations |
1 (MultiTip-Tooling possible) |
| Tool guide | Upper and lower |
| Upper punch force max. | 30 kN |
| Precompression force max. | N/A |
| Tablet diameter max. | 20 mm |
| Filling max. | 15 mm |
| Tablet output max. | 3000 pcs. per h (with SingleTip-Tooling) |
| Measuring points | No measuring installed |
| Feeder type | Gravity feeder with agitator |
| Dimensions fully | W500 x D500 x H1.700 mm |
| Weight | appr. 130 kg |
| Power supply | 230 V, 50 Hz, CEE-16A-3pole (blue) |
Riva Minipress M2 Single punch press
– Checked and ready for operation
– Display of the compression force
– Infinitely variable number of strokes with display
– Safety chain
– Separation of compression area
– Various spare parts
– Ideal for small batches and research / development
– Including operating tools
– Retrofitting possible according to your requirements
– Delivery of tableting tools
The following suitable used tableting tools are for sale:
Oval 16x7mm
| Manufacturer | Riva |
| Machine type |
Minipress M2 |
| Year of manufacture | 2008 |
| Tool type | Riva Minipress |
| Tool stations |
1 (MultiTip-Tooling possible) |
| Tool guide | Upper and lower |
| Upper punch force max. | 60 kN |
| Precompression force max. | N/A |
| Tablet diameter max. | 24 mm |
| Filling max. | 18 mm |
| Tablet output max. | 6000 pcs. per h (with SingleTip-Tooling) |
| Measuring points | Upper Punch force |
| Feeder type | Gravity feeder, oscillating |
| Dimensions fully | W720 x D450 x H860 mm |
| Weight | appr. 190 kg |
| Power supply | 240V, 1Ph + N |
Korsch EK1 Single punch press
– Checked and ready for operation
– Continuously variable speed
– Ideal for small batches and research/development
– Including operating tools
– Optional retrofitting possible according to your requirements
– Equipping with TabCon-Series recommended
– Delivery of tableting tooling
The following suitable used tableting tooling sets are for sale (also separately):
Round 12mm Convex
Round 21mm Flat-faced plain
Round 30mm Flat-faced plain
Round 40mm Flat-faced plain
Round 50mm Flat-faced plain
Round 7mm Flat-faced bevel-edged
V-Shape 12,1×10,5 Flat-faced plain
W-Shape 11,6×11 Flat-faced plain
Round 2mm Convex Ten-Tip-Tooling
| Manufacturer | Korsch |
| Machine type |
EK1 |
| Year of manufacture | 1972 |
| Tool type | Korsch EK1 |
| Tool stations |
1 (MultiTip-Tooling possible) |
| Tool guide | Upper and lower |
| Upper punch force max. | 70 kN |
| Precompression force max. | N/A |
| Tablet diameter max. | 30 mm |
| Filling max. | 30 mm |
| Tablet output max. | ca. 3000 pcs. per h (with SingleTip-Tooling) |
| Measuring points | No measuring installed |
| Feeder type | Gravity feeder with agitator |
| Dimensions fully | W670 x D660 x H1.500 mm |
| Weight | appr. 500 kg |
| Power supply | 400V, 3Ph + N, 50Hz |
Korsch PH329 Rotary tablet press
– Equipped with TabCon Pro in 2017 (complete electrical exchange)
– Overhauled in 2020, various new parts
– Regularly maintained and calibrated
– Complete documentation
– Retrofitting possible according to your requirements
– Delivery of tableting tools
| Manufacturer | Korsch |
| Machine type |
PH329 |
| Year of manufacture | 1980 |
| Tool type | EU-1″ (EU-D) |
| Tool stations |
29 (MultiTip-Tooling possible) |
| Key grooves |
upper |
| Main compression force max. | 80 kN |
| Precompression force max. | 20kN |
| Tablet diameter max. | 25 mm |
| Filling max. | 22 mm |
| Punch separation max. | 9,5 mm |
| Tablet output max. | 139.200 Pcs./h (with SingleTip-Tooling) |
| Measuring points | Main compression force |
| Feeder type | Force feeder |
| Dimensions fully | W960 x D960 x H1.765 mm |
| Weight | 2.400 kg |
| Power supply | 400V, 3Ph + N, 50Hz |